Filter
Top Products
22
Speaker settings (continued)
BALANCE ------------------------------ Adjust
the balance of each speaker in 1.0 dB steps from
–6 dB [L] to +6 dB [R]. Default adjustments are
0.0 dB.
• FRONT: The balance between the front left
and right speakers.
• REAR: The balance between the rear left and
right speakers.
LEVEL ------------------------ Adjust the level of
each speaker in 1.0 dB steps from –10 dB to
+6 dB. Default adjustments are 0.0 dB.
• CENTER: The level of the center speaker.
• REAR: The level of the rear speakers.
• SUBWOOFER: The level of the subwoofer.
TEST TONE --------------------------- Use the
test tone to adjust the speaker volume.
• OFF: The test tone is not emitted from the
speakers.
• ON: During adjustment of “BALANCE” or
“LEVEL”, the test tone is emitted from both
speakers simultaneously.
Note
While you are playing a disc, you cannot hear the
test tone. Execute the test tone after you stop
playback.
Adjusting the speaker
balance/level
1 In the stop mode, press DVD SETUP,
then select “SPEAKER SETUP”.
2 Select “TEST TONE” and set “TEST
TONE” to “ON”.
You will hear the test tone from each speaker
in sequence.
3 From your listening position, press V or
v repeatedly to select “BALANCE” or
“LEVEL”, then press ENTER. Adjust
the value of “BALANCE” and
“LEVEL” using V or v.
During this adjustment, the test tone is
emitted from both speakers simultaneously.
4 Select “TEST TONE” and set “TEST
TONE” to “OFF” to turn off the test
tone.
To return to the default setting
Select the item, then press CLEAR.
Tip
If you turn VOLUME (or press VOL +/– on the
remote), all the speaker volumes change.