Filter
Top Products
26
Playing discs (continued)
To
Play all discs
Remove a disc
Exchange other
discs while
playing
Adjust the
volume
*
1
There may be some disturbance in the video
image.
*
2
Only when the PBC function is set to off or when
playing VIDEO CDs without PBC functions (Ver
1.1).
*
3
SLOW t and STEP c are not available during
playback of VIDEO CDs.
*
4
DVD and VIDEO CD only.
Tips
• Pressing DVD NX when the power is off
automatically turns the power on and starts disc
playback if there is a disc in the tray (One Touch
Play). When the system is in the Power Saving
Mode, the One Touch Play function does not work.
• You can switch from another source to the DVD
player and start playing a disc just by pressing DVD
NX or one of the DISC 1~5 buttons (Automatic
Source Selection).
• If there is no disc in the player, “No Disc” appears
in the display.
• When a disc tray is holding a disc, the indicator for
the tray lights. In the display, when a disc tray
holding a disc is selected (or the disc in the disc tray
is playing), the disc pointer indicator lights. When a
disc tray holding a disc is not selected, the disc
presence indicator lights, but the disc pointer
indicator does not light. When all disc trays are
empty, all the disc pointer indicators and all the disc
presence indicators light.
Do this
1 Press MODE SELECT
repeatedly to select “Set Up
Mode”, then press PUSH ENTER
in stop mode.
2 Move the multi stick toward B or
b repeatedly to select “DVD Set
Up ?”, then press PUSH ENTER.
3 Move the multi stick toward B or
b repeatedly to select “Play
Mode Set Up ?”, then press
PUSH ENTER.
4 Move the multi stick toward B or
b repeatedly to select “Play
Mode All Discs”, then press
PUSH ENTER.
Press one of the A 1~5 buttons.
Press one of the A 1~5 buttons
to open the tray that contains
the disc that you want to
change. When you change the disc,
press the same button to close the
tray.
Turn VOLUME (or press VOL +/–
on the remote).