Filter
Top Products
72
10 Press DVD NX, and then press x to
check the total playing time.
The total playing time appears in the
display.*
If the total program time exceeds the length
of the tape for recording, start again from
step 3.
* If there are discs in the program whose TOC
has not been read, the program screen returns
after TOC reading is complete. Once the
program screen returns, press DVD NX, and
then press x.
11 Press CD SYNC.
Deck B stands by for recording and the DVD
player stands by for playback. The TAPE B
N indicator (for front side) lights and the
REC PAUSE/START button flashes.
12 Press MODE SELECT repeatedly to
select “Set Up Mode”, then press
ENTER.
13 Press B or b repeatedly to select
“TAPE Set Up ?”, then press ENTER.
14 Press B or b repeatedly to select
“Direction Set Up ?”, then press
ENTER.
15 Press B or b repeatedly to select
“1 Way” to record on one side, or
“Cycle” (or “Relay”) to record on both
sides, then press ENTER.
16 Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
To cancel the menu operation
Press MODE SELECT.
To check the order
1 Press FUNCTION repeatedly until “DVD”
appears in the display.
2 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press ENTER.
3 Press B or b repeatedly to select “DVD Set
Up ?”, then press ENTER.
4 Press B or b repeatedly to select “Program
Set ?”, then press ENTER.
5 Press B or b.
The disc number and the track number appears.
6 After checking the program, press MODE
SELECT.
To cancel Program Edit
1 Press FUNCTION repeatedly until “DVD”
appears in the display.
2 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press ENTER.
3 Press B or b repeatedly to select “DVD Set
Up ?”, then press ENTER.
4 Press B or b repeatedly to select “Play Mode
Set Up ?”, then press ENTER.
5 Press B or b repeatedly to select “All Discs” or
“1 Disc”, then press ENTER.
The tracks continue playing in their original order.
Tip
When you want to reduce the hiss noise in low-level
high-frequency signals, do the following procedure
after pressing CD SYNC in step 11 on the previous
page.
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press ENTER.
2 Press B or b repeatedly to select “TAPE Set Up ?”,
then press ENTER.
3 Press B or b repeatedly to select “DOLBY NR Set
Up ?”, then press ENTER.
4 Press B or b repeatedly to select “On”, then press
ENTER.
“DOLBY NR” appears in the display.
To return to the original setting, repeat steps 1
through 4 and select “Off” in step 4.
Recording a disc by specifying
the order (continued)