Filter
Top Products
The Tape deck
73
Mixing and recording
sounds
(Asian model only)
You can “mix” sounds by playing one of the
components and singing or speaking into a
microphone (not supplied). The mixed sounds can
be recorded on a tape.
Multi stick
PUSH ENTER
5
3
1 4,9
Power
(?/1)
continued
2
4 Press REC PAUSE/START.
Deck B stands by for recording.
5 Press MODE SELECT repeatedly to
select “Set Up Mode”, then press PUSH
ENTER.
6 Move the multi stick toward B or b
repeatedly to select “TAPE Set Up ?”,
then press PUSH ENTER.
7 Move the multi stick toward B or b
repeatedly to select “Direction Set
Up ?”, then press PUSH ENTER.
8 Move the multi stick toward B or b
repeatedly to select “1 Way” to record
on one side, or “Cycle” (or “Relay”) to
record on both sides, then press PUSH
ENTER.
9 Press REC PAUSE/START.
Recording starts.
10 Start playing the source to be
recorded.
Start singing along with the music.
To stop recording
Press x.
x
1 Turn MIC VOL to MIN to turn down
the microphone level.
2 Connect an optional microphone to
MIC.
3 Press FUNCTION repeatedly until the
source you want to record appears in the
display (e.g., DVD).