Filter
Top Products
59
The Radio
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 58).
continued
To erase a preset station
1 Press TUNER/BAND repeatedly to select FM
or AM.
2 Press MODE SELECT repeatedly to select
“Set Up Mode”, then press PUSH ENTER.
3 Move the multi stick toward B or b repeatedly
to select “TUNER Set Up ?”, then press PUSH
ENTER.
4 Move the multi stick toward B or b repeatedly
to select “TUNER Erase ?”, then press PUSH
ENTER.
5 Move the multi stick toward B or b repeatedly
to select the preset number you want to erase,
then press PUSH ENTER.
Select “TUNER Ers FM ALL” (or “TUNER
Ers AM ALL”) when you want to erase all the
preset stations.
When you erase a preset number, the preset
number decreases by one and all preset numbers
following the erased one are renumbered.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or a power failure occurs.
To change the AM tuning
interval
(Except for Middle Eastern and
European models)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To switch the AM tuning
interval, tune in any AM station first, then turn off
the power. While holding down MODE SELECT,
turn the power back on. When you switch the
interval, AM preset stations are erased. To switch
back to the original interval, repeat the same
procedure.
Numeric buttons
?/1 (Power)
xMm>.
nN X
nNN
TtCc
O
TUNER BAND
VOL +/–
V
v
bB
./>
>10