Filter
Top Products
The Tape deck
65
Tips
• Pressing TAPE A (or TAPE B) N or n when the
power is off automatically turns the power on and
starts tape playback if there is a tape in the deck
(One Touch Play). When the system is in the Power
Saving Mode, the One Touch Play function does
not work.
• You can switch from another source to the tape
deck just by pressing TAPE A (or TAPE B) N or
n (Automatic Source Selection).
• When you want to reduce the hiss noise in low-level
high-frequency signals, do the following procedure:
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward B or b repeatedly
to select “TAPE Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward B or b repeatedly
to select “DOLBY NR Set Up ?”, then press
PUSH ENTER.
4 Move the multi stick toward B or b repeatedly
to select “On”, then press PUSH ENTER.
“DOLBY NR” appears in the display.
To return to the original setting, repeat steps 1
through 4 and select “Off” in step 4.
Searching for the beginning of a
track (AMS*)
During playback, press . or > repeatedly to
go forward in the same direction as the n or N
indicator. Press . or > repeatedly in the
opposite direction to go back.
The search direction, + (forward) or – (back), and
number of songs being skipped (1~9) appear in the
display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Do this
Press x.
Press m or M.
Press m or M.
Press A A or A B.
Turn VOLUME.
continued
4 Move the multi stick toward B or b
repeatedly to select “TAPE Set Up ?”,
then press PUSH ENTER.
5 Move the multi stick toward B or b
repeatedly to select “Direction Set
Up ?”, then press PUSH ENTER.
6 Move the multi stick toward B or b
repeatedly to select “1 Way” to play one
side, “Cycle” to play both sides, or
“Relay”* to play both decks in
succession, then press PUSH ENTER.
7 Press TAPE A (or TAPE B) N.
Press TAPE A (or TAPE B) n to play the
reverse side. The tape starts playing.
When using the remote, press TAPE A (or
TAPE B) nN to start playback. To play
reverse side, press TAPE A (or TAPE B)
nN again.
* Relay play always follows the following sequence:
t
Deck A (front side)
t
Deck A (reverse side)
Deck B (reverse side)
T
Deck B (front side)
T
To
Stop play
Fast-forward
Rewind
Remove the cassette
Adjust the volume
• This tape deck does not have a play pause function.
You cannot use X to pause tape playback.
To cancel the menu operation
Press MODE SELECT.