Filter
Top Products
88
GB
Recording the audio signal on
a connected component
1 Connect the audio cords.
See “Hooking up optional components” on
page 85.
2 Start recording.
Refer to the operating instructions provided
with connected component.
Recording the audio and video
signals from a VIDEO CD into
a video tape
1 Connect optional audio cords from the
AUDIO OUT jacks and the supplied
video cord from the VIDEO OUT jack to
the audio and video input jacks of you
VCR.
2 Start recording.
Refer to the operating instructions provided
with connected component.
Note
The audio signal from AUDIO OUT jack cuts off for a
moment during some operations such as when you
press SOUND FIELD, AUDIO or KARAOKE
MODE.
Connect an external antenna to improve the
reception.
FM antenna
Connect an optional FM external antenna. You
can also use the TV antenna instead.
AM antenna
Connect a 6 to 15 meter insulated wire to the
AM antenna terminal. Leave the supplied AM
loop antenna connected.
Recording audio signal on
a connected component
Connecting external
antennas
AM
FM 75
CO
AXIAL
FM 75
CO
AXIAL
AM
Insulated wire
(not supplied)