Filter
Top Products
66
GB
Use the buttons on the unit for the operation.
Turn OPERATION DIAL clockwise or
counterclockwise to select the preset effect
you want.
Preset effect options
To cancel the preset effect
Turn OPERATION DIAL clockwise or
counterclockwise until “FLAT” appears in the
display.
Note
To store the user equalizer setting, see “Adjusting the
graphic equalizer and storing the user equalizer
setting” on page 66.
You can adjust the sound by raising or lowering
the level of specific frequency band, then store
up to three user equalizer setting in the memory.
Use the buttons on the unit for the operation.
1 Press EQ BAND repeatedly to select a
frequency band.
2 Turn OPERATION DIAL clockwise or
counterclockwise to adjust the level.
3 Repeat step 1 and 2 to adjust the level
of other frequency bands.
4 Press ENTER.
A user equalizer number flashes in the
display.
5 Turn OPERATION DIAL clockwise or
counterclockwise to select a user
equalizer number (1~3) you want to
store the equalizer setting.
6 Press ENTER.
This setting is automatically stored as the
user equalizer setting you selected in step 5.
The previous setting stored at this memory
location is erased and replaced by the new
setting.
To cancel storing
Turn OPERATION DIAL clockwise or
counterclockwise in step 5 to select “EXIT?”,
then press ENTER.
To call up a user equalizer setting
Turn OPERATION DIAL clockwise or
counterclockwise until the user equalizer setting
number you want appears in the display.
Selecting the preset
effect
Effect Category
ROCK
POP
JAZZ
DANCE
SOUL
TECHNO
HIP HOP
Standard music sources
MP3 EQ MP3 audio tracks
FLAT Original music source
USER EQ 1
USER EQ 2
USER EQ 3
User equalizer setting
Adjusting the graphic
equalizer and storing the
user equalizer setting
Frequency level
Frequency band