Filter
Top Products
Tape – Playback/Tape – Recording
63
GB
Other operations
Note
Do not push b (Z A) or B (B Z) on the unit while
playing a tape, otherwise the tape could be damaged.
Tips
• When a tape is inserted, corresponding presence
indicator lights up in the display.
• If you press TAPE A/B on the unit while the system
is turned off, the system turns on automatically and
“TAPE A” or “TAPE B” is selected as the function.
• If you press H (or nN on the unit) during TAPE
A function and there is no tape in Deck A, the system
automatically switches to TAPE B function when
there is a tape in Deck B and vice versa. Then,
playback will start.
You can record a whole disc into a tape. You can
use TYPE I (normal) tape. The recording level is
adjusted automatically.
Use buttons on the unit for the operation.
1 Load a recordable tape into Deck B.
2 Press DVD and load a disc you want to
record.
3 Press CD SYNC.
“SYNC” lights up in the display and
“REC” flashes in the display.
Deck B standby for recording.
4 Press DIRECTION repeatedly to select
“g” to record on one side or “j”
(or “RELAY”) to record on both sides.
5 Press REC PAUSE/START.
“REC” lights up in the display.
Recording starts.
To Do this
Stop playback Press x.
Pause playback Press X. Press X again to resume
playback.
Fast-forward or
rewind
Press m or M (or turn
m M on the unit clockwise or
counterclockwise). To return to
normal playback, press H
(or nN on the unit).
Remove a tape Push b (Z A) or B (B Z) on the
unit according to its direction
when playback is stopped.
Tape – Recording
Recording your favorite
tracks on a disc into a
tape
— CD Synchro Recording
continued