Filter
Top Products
14
GB
1 Press ?/1 to turn on the system.
2 Press TIMER MENU.
The hour indication flashes in the display.
3 Press M or m repeatedly to set the hour.
4 Press ENTER.
The minute indication flashes in the
display.
5 Press M or m repeatedly to set the
minute.
6 Press ENTER.
The clock starts functioning.
To adjust the clock
1 Press TIMER MENU.
“PLAY SET?” flashes in the display.
2 Press M or m repeatedly to select “CLOCK
SET?”, then press ENTER.
The hour indication flashes in the display.
3 Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in power saving mode
(page 79).
You can set the initial settings of LANGUAGE
SETUP, TV TYPE and SPEAKER SETUP step
by step in QUICK SETUP. After performing the
QUICK SETUP, the system is ready for playing
back of movies, music CDs, etc. To perform
further speakers settings, see “Speaker settings”
on page 49.
1 Turn on your TV and select the video
input.
2 Press ?/1 to turn on the system.
Note
Make sure that the headphone or microphone is
not connected. Otherwise, you cannot perform
SPEAKER SETUP.
3 Press FUNCTION +/– repeatedly to
select “DVD” (or press DVD on the
unit).
“Press to run QUICK SETUP.”
guide message appears at the bottom of the
on-screen display.
4 Press ENTER.
The “LANGUAGE SETUP” display
appears in the on-screen display.
Setting the clock Performing QUICK SETUP
ENTER
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
PORTUGUESE
FRENCH
ENGLISH
ENGLISH
SPANISH