Filter
Top Products
Display
79
GB
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
• If you use the Timer Recording and the Sleep Timer
at the same time, the Sleep Timer has priority.
• The Timer Recording will not be activated if the
system is turned on or “STANDBY” flashes in the
display.
• The volume is reduced to minimum during Timer
Recording.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
Tips
• The system turns on 30 seconds before the preset
time.
• When Timer Recording is selected, “REC” lights up
in the display.
The demonstration display and the clock display
can be turned off to minimize the amount of
power consumed during standby mode (Power
Saving Mode).
Press DISPLAY repeatedly while the
system is turned off until the
demonstration display and the clock
display disappears.
To cancel Power Saving Mode
Press DISPLAY repeatedly while the system is
turned off. Each time you press the button, the
display changes cyclically as follows:
Demonstration
1)
t Clock
2)
t No display
(Power Saving Mode)
1)
The display changes and the indicators flashes even
when the system is turned off.
2)
“– –:– –” appears in the display if you have not set
the clock.
Note
You cannot perform the following operations during
Power Saving Mode:
– Setting the clock (page 14)
– Changing the AM tuning interval (page 60)
– Turning on the system by pressing DVD, TUNER/
BAND, TAPE A/B, TV/SAT or VIDEO on the unit.
– Changing the color system (page 11)
Tips
• The timer continues to operate in Power Saving
Mode.
• ?/1 indicator lights up in red even in the Power
Saving Mode.
Display
Turning off the display
— Power Saving Mode