Filter
Top Products
76
GB
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP repeatedly.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
90min t 80min t 70min
t … t 10min t OFF
Other operations
Note
“SLEEP” lights up in the display when the Sleep Timer
is activated.
Tip
You can use the Sleep Timer even if you have not set
the clock.
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 14).
1 Prepare the music source you want to
playback.
• Disc: Load a disc.
• Tape: Load a tape with the side you want
to play back facing forward.
• Radio: Tune in the preset station you
want (see “Listening to the radio” on
page 61).
2 Press VOLUME +/– (or turn MASTER
VOLUME on the unit clockwise or
counterclockwise) to adjust the
volume.
3 Press TIMER MENU.
4 Press M or m repeatedly (or turn
.> on the unit
clockwise or
counterclockwise) to select “PLAY
SET?”, then press ENTER.
“ON” appears and the hour indication
flashes in the display.
5 Set the time to start playback.
Press M or m repeatedly (or turn .>
on the unit clockwise or counterclockwise)
to set the hour, then press ENTER.
The minute indication flashes in the display.
Press M or m repeatedly (or turn .>
on the unit clockwise or counterclockwise)
to set the minute, then press ENTER.
“OFF” appears and the hour indication
flashes in the display.
6 Set the time to stop playback following
the same procedure as step 5.
Timer
Falling asleep to music
— Sleep Timer
To Do this
Check the
remaining time
Press SLEEP once.
Change the time
to turn off
Press SLEEP repeatedly to select
the time you want.
Cancel the Sleep
Timer
Press SLEEP repeatedly until
“SLEEP OFF” appears in the
display.
Waking up to music
—Play Timer