Filter
Top Products
54
GB
Operating for the THEATER
SYNC function
Point the remote to the direction of TV and
this unit, then press THEATER SYNC.
If this function does not work, change the
transmission time. The transmission time varies
depending on the TV.
To change the transmission time
Hold down > and press numeric button
to change the transmission time.
The transmission time from the remote is
selected.
Notes
• This function is only available for Sony TV series.
• If distance between TV and this unit is too far, this
function may not work. Install the unit near the TV.
Progressive is the method for displaying the TV
images which reduces flickering and sharpens
the image. To display by using this method, you
need to connect to a TV that can accepts
progressive signals.
You can output video signal from
COMPONENT VIDEO OUT jacks in
INTERLACE or PROGRESSIVE format.
1 Press FUNCTION +/– repeatedly to
select “DVD” (or press DVD on the
unit).
2 Press PROGRESSIVE on the unit
repeatedly.
Each time you press the button, the display
changes cyclically as follows:
P AUTO
t P VIDEO t INTERLACE
x P AUTO (PROGRESSIVE AUTO)
Select this when your TV accepts progressive
signals and the TV is connected to the
COMPONENT VIDEO OUT jacks. The system
automatically detects the software type and
selects the appropriate conversion method.
x P VIDEO (PROGRESSIVE VIDEO)
Select this when your TV accepts progressive
signals and the TV is connected to the
COMPONENT VIDEO OUT jacks.
The system fix the conversion method to
PROGRESSIVE VIDEO for video-based
software.
Select this if the image is not clear when you
select “P AUTO”.
x INTERLACE
Select this when your TV does not accept
progressive signals or your TV is connected to
the VIDEO OUT or S VIDEO OUT jack.
Hold down >
and press
Transmission time
1 0.5 (Default)
21
31.5
42
52.5
63
73.5
84
Changing the format of
the video signal from
COMPONENT VIDEO OUT
jacks