Sony MHC-GNV111D Stereo System User Manual


 
Sound Adjustment
65
GB
Notes
When you press REC PAUSE/START, the sound
field is changed to LINK if the current sound field is
SBS MULTI, A.F.D. AUTO, PRO LOGIC, PLII
MOVIE, PLII MUSIC or V.M.DIM.
When you press REC PAUSE/START, the sound
field is changed to HP 2CH if the current sound field
is HP VIRTUAL.
You cannot listen to other sources while recording.
Tips
For recording from the reverse side:
After step 1 of “Recording on a tape manually”
(page 64), press TAPE A/B repeatedly until “TAPE
B” appears in the display. Press nN repeatedly
until TAPE B reverse side indicator lights up to start
playback of the reverse side. Press x at the point you
want to start recording.
When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
For recording from a disc to a tape manually:
You can turn .> clockwise or
counterclockwise to select tracks during recording
pause mode (after step 4 and before step 6 of
“Recording on a tape manually” on page 64).
For recording from the tape:
If you set the direction to “j” (or “RELAY”)
when the tapes you use have different lengths, the
tape in each deck reverses independently.
You can reinforce the bass and create a more
powerful sound.
The GROOVE setting is ideal for music sources,
and the V-GROOVE setting is ideal for video
sources (movie, etc.).
Press GROOVE on the unit repeatedly.
Each time you press the button, the display
changes cyclically as follows:
GROOVE ON* t V-GROOVE ON* t
GROOVE OFF
* The volume switches to power mode and the
equalizer curve changes.
Tips
The default setting is “GROOVE ON”.
“GROOVE” lights up in the display if “GROOVE
ON” is selected.
“V-GROOVE” lights up in the display if
“V-GROOVE ON” is selected.
Sound Adjustment
Adjusting the sound