Filter
Top Products
60
GB
4 Press ENTER.
A preset number flashes in the display.
The stations are stored from preset
number 1.
5 Press PRESET +/– repeatedly (or turn
PRESET +/– on the unit clockwise or
counterclockwise) to select the preset
number you want.
6 Press ENTER.
“Complete!” appears in the display. The
station is stored.
7 Repeat steps 2 to 6 to store other
stations.
Other operations
To change the AM tuning interval
(except for Saudi Arabian and
Russian models)
The factory setting for AM tuning interval is
9 kHz (or 10 kHz for same areas).
Use buttons on the unit for the operation.
1 Press TUNER/BAND repeatedly to select
“AM”.
2 Press ?/1 to turn off the system.
3 Hold down ENTER and then press ?/1 to
turn on the system.
“AM 9k STEP” or “AM 10k STEP” appears in
the display.
When you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Note
You cannot change the AM tuning interval in the
Power Saving Mode (page 79).
Tips
• The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
• If you press TUNER/BAND on the unit while the
system is turned off, the system turns on
automatically and “TUNER” is selected as the
function (except for Power Saving mode (page 79)).
To Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 59).
Stop scanning
during automatic
tuning
Press x.
Cancel presetting Press MENU.
Preset number