Filter
Top Products
12
GB
Inserting two R6 (size AA)
batteries into the remote
Operating a Sony TV
You can use the following orange printing
buttons to operate a Sony TV.
To use the buttons with orange printing, press
TV and the button you want simultaneously.
* To select the TV channels with channel number more
than 10, press -/--, then press numeric buttons.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and to
prevent them from slipping.
To Press
Turn the TV on or off TV ?/1
Switch the TV’s input
source between the TV
and other input sources
TV/VIDEO
Select the TV channels TV CH +/– or numeric
buttons*
Adjust the volume of the
TV speaker(s)
TV VOL +/–
When carrying the unit
Do the following procedure to protect the disc
mechanism.
Use buttons on the unit for the operation.
1 Press ?/1 to turn on the system.
2 Press DVD.
3 Press Z OPEN/CLOSE to open the disc
tray and remove the disc. If there are
more than one disc in the disc tray, press
EX-CHANGE/DISC SKIP to remove the
discs.
4 Press Z OPEN/CLOSE again to close
the disc tray. Wait until the “DVD No Disc”
appears in the display.
5 Hold down DVD and then press ?/1 until
“STANDBY” appears in the display.
Then, “MECHA LOCK” appears in the
display.
6 Unplug the AC power cord.