Filter
Top Products
50
C4630 SE HOME AUDIO SYSTEM
Finding RS-232 Commands in Macros
As stated on page 42, the C4630 SE is capable of serial operation in
one direction
only
, either inbound
OR
outbound. Placing a single RS-232
command in one macro will automatically configure the C4630 SE for
outbound
serial operation — the unit will
not
respond to inbound
commands from a connected serial control device.
To allow the C4630 SE to become an
inbound
serial device that will
respond to commands from a connected serial control device you must
remove all RS-232 commands from all C4630 SE macros. The System
Configuration Report allows you to see every command in every
C4630 SE macro, making it easier to delete all RS-232 commands.
As you scroll-through the macros in the System Configuration Report,
RS-232 macro commands will appear as shown in
Figure 73
.
RS-232 Macro
Commands
Figure 73:
System Configuration Report
Showing RS-232 Macro Commands