Filter
Top Products
26
C4630 SE HOME AUDIO SYSTEM
Upgrading the C4630 SE Firmware
To check which version of C4630 SE firmware is loaded on the unit, connect
the USB cable between the C4630 SE and your computer and launch the
Sonance Control Manager program. Open the C
OMMUNICATIONS menu and
select G
ET
FIRMWARE VERSION. The FIRMWARE VERSION INFO screen (
Figure 30
)
will appear. If the firmware version in the C4630 SE is earlier than the one
listed on the Sonance website:
1. Follow the instructions on the website to download the newer version of
the C4630 SE firmware onto your computer.
2. Unzip the new firmware file and save it in a convenient location on your
computer.
3. Open the C
OMMUNICATIONS menu and select UPDATE FIRMWARE. The SELECT NEW FIRM WARE IMAGE browser window will open.
4. Use the browser window to navigate to the new firmware file you just saved and click O
PEN.
5. The warning screen shown in
Figure 31
will appear:
•
IIff tthhee CC44663300 SSEE uunniitt hhaass pprrooggrraammmmiinngg tthhaatt yyoouu wwaanntt
ttoo ssaavvee
, click C
ANCEL. Open the C
OMMUNICATIONS menu
and select R
ECEIVE FROM
DEVICE. The programming in the
C4630 SE will be saved as a new device in the open
system. Proceed to Step 6.
6. Click OK. The C4630 SE’s firmware will be upgraded. (The
program in the C4630 SE will be erased).
7. To reprogram a C4630 SE with the program you saved in Step 5, see
Transferring System Information to the C4630 SE
,
on page 25.
NOTE: If the Communications Window opens after Step 6, unplug and reconnect the USB cable.
The Sonance Control Manager will automatically send the firmware update.
Figure 30:
F
IRMWARE
VERSION INFO Screen
Figure 31:
Upgrade Firmware Warning Screen