Filter
Top Products
28
C4630 SE HOME AUDIO SYSTEM
6. Open the FILE menu and
select J
OB INFO:
• The D
EALER tab (
Figure 35
)
allows you to record
information about the
particular job, including
system design notes,
firmware upgrades, etc.
This information is not
transferred to the C4630 SE
— it is saved only in the sys-
tem program file in your
computer.
• The C
LIENT tab (
Figure 36
)
gives you a place to record
your client’s contact
information, along with
information about the
general contractor, interior
designer. etc. Like the
D
EALER information, the CLIENT information is saved only in the system program file in your computer and is not transferred
to the C4630 SE.
Renaming C4630 SEs in a System with Multiple Units
To minimize confusion when programming systems with multiple C4630 SEs we
recommend that you rename each unit to identify it, such as “C4630 SE #1 Zones 1-6”,
and “C4630 SE #2, Zones 7-12”.
In the S
YSTEM WORKSPACE area of the Device screen (see
Figure 37
), select each
C4630 SE in the system and rename each one with a different name.
Figure 35:
J
OB INFO Screen DEALER Tab
Figure 36:
J
OB INFO Screen CLIENT Tab
System
Workspace
Area
Figure 37:
The S
YSTEM WORKSPACE Area