Sonance C4630 SE Stereo System User Manual


 
23
C4630 SE HOME AUDIO SYSTEM
Optional C4630 SE IR Remote Control
(see
Figure 24
)
NOTE: The C4630 SE does not have a built-in IR
receiver. To use the optional remote control you must
first connect an IR receiver (available separately).
See Main Keypad IR Receiver Holster, on page 19.
The buttons on the optional C4630 SE IR remote will perform the
same functions as the correspondingly-named buttons on the Main
and Numeric Keypads (see
Figure 14
, on page 18). Additionally,
the remote also has an A
LL OFF button and an OK button.
AA
LLLL
OOFFFF BBuuttttoonn::
Pressing the ALL OFF button will turn-OFF all
zones in the system, including any zones being run by additional
C4630 SEs that are connected via their S
YNC connections (see
page 16).
OOKK BBuuttttoonn::
The OK button provides a discrete confirmation
command for use with devices requiring that an additional
“select” or “enter” command following a numeric button entry.
NOTE: The remote’s keypad is covered with a removable
film to protect it during manufacture and shipping.
C4630 SE “Out-Of-The-Box” Functions
Without additional programming via the Sonance Control
Manager, the C4630 SE has very limited functionality. The
following functions are available “out-of-the-box” through the
C4630 SE Main Keypad (see
Figure 14
, on page 18) and the optional IR remote:
VV
OO LLUUMM EE
UUPP//DDOOWWNN ::
P
RESS
the VOLUME UP/DOWN buttons.
MMuuttee::
P
RESS the Mute button to Mute/un-Mute the local zone; PRESS-AND-HOLD the MUTE button to Mute/un-Mute all zones
designated for PARTY MODE.
ZZoonnee SSoouurrccee SSeelleecctt::
P
RESS one of the four ZONE SOURCE SELECT buttons to select that source in the local zone. PRESS-AND-
H
OLD one of the four zone source select buttons to select that source in all zones designated for PARTY MODE. Pressing a
S
OURCE SELECT button in a zone that is OFF will turn that zone ON.
ZZoonnee OOFFFF::
P
RESS the Zone OFF button to turn the local zone OFF.
The Numeric Keypad will not function unless the C4630 SE is programmed via the Sonance Control Manager.
NOTE: These “Out-Of-The-Box” functions can also be operated from the optional C4630 SE
IR Remote Control if an IR receiver is installed in one of the Main Keypads (see page 19).
1
2
3
1
2
OFF
OK
VOL
+
3
45
6
7
8
0
_
+
9
4
VOL
-
MUTE
OFF
C4630 SE
ALL
ZONE
SOURCE
P
R
E
S
E
T
S
2
1
3
4
5
6
7
8
9
1. Zone OFF Button
2. All OFF Button
3. Zone Volume UP Button
4. Zone MUTE Button
5. Zone Volume DOWN Button
6. Zone Source Selector Buttons
(Source 1 – Source 4)
7. OK Button
8. Numeric Buttons;
“+” and “–” Buttons
9. Zone Source Control Buttons
Figure 24: C4630 SE IR Remote Control