Filter
Top Products
45
C4630 SE HOME AUDIO SYSTEM
SIMULATE BUTTON PRESS Serial Commands
The SIMULATE
BUTTON PRESS serial command
:P
(see table on page 43) can be
used to allow a serial control device to trigger the macro that is programmed
into any keypad button in any C4630 SE zone.
The command format is
::PPzzxxyyyyyy<<ccrr>>
P = Simulate button press
z = The Zone number of the command (1 – 6)
x = The command layer: 1 = P
RESS, 2 = PRESS-AND-HOLD, 3 = DOUBLE-PRESS, 4
= E
XTRA COMMANDS (see
Expanded Control Features
, on page 47)
yyy = The keypad button to be triggered, from the table in
Figure 65.
For example, to trigger the PRESS layer SOURCE 1 keypad button macro in
Zone 2 the serial command would be:
::PP22111177<<ccrr>>
P = S
IMULATE B
UTTON PRESS command
2 = Zone 2
1 = P
RESS layer
17 = SOURCE 1 button
Simulate Button Press Commands in Multi-Unit Systems
As with other serial commands, a S
IMULATE BUTTON PRESS command can be
used to control any C4630 SE in a system with multiple units by adding the
C4630 SE’s Unit ID number (see page 27) to the command after the colon.
For example, to trigger the P
RESS layer SOURCE 1 keypad button macro in
Zone 2 of Unit #3 in a multi-unit system, the serial command would be:
::33PP22111177<<ccrr>>
3 = Unit ID #3
P = S
IMULATE BUTTON PRESS command
2 = Zone 2
1 = P
RESS layer
17 = SOURCE 1 button
KKeeyyppaadd BBuuttttoonn yyyyyy eeqquuiivvaalleenntt
Numeric 1 1
Numeric 2 2
Numeric 3 3
Numeric 4 4
Numeric 5 5
Numeric 6 6
Numeric 7 7
Numeric 8 8
Numeric 9 9
Numeric 0 10
Numeric – 11
Numeric + 12
Main Volume Up 13
Main Mute 14
Main Volume Down 15
Main Off 16
Main Source 1 17
Main Source 2 18
Main Source 3 19
Main Source 4 20
Main Pause 21
Main Play 22
Main Backward 23
Main Forward 24
Remote OK 25
Extra Commands* 001 – 200
* See page 47 for details about Extra
Commands.
Figure 65:
S
IMULATE BUTTON PRESS
Serial Commands