Filter
Top Products
11
C4630 SE HOME AUDIO SYSTEM
Zone Considerations (continued from page 8)
What is the performance requirement for each zone? Some zones may only require a keypad controller and speakers.
Some may need an additional IR receiver. One may need a more flexible keypad and a high-power amplifier. A master
suite may require a multi-channel amplifier to distribute audio to the bedroom, bathroom and patio. One or more zones
may have local devices that need to be incorporated into the system for control, audio or video. The C4630 SE can be used
with several different Sonance keypad controllers and IR receivers, so you can select the ones that are best for each zone.
Connecting the C4630 SE
Power Connections
PPoowweerr CCoorrdd::
The C4630 SE features a removable IEC power cord. Plug the female
end of the power cord into the Power Cord Connector on the Controller’s rear panel
and plug the male end into a grounded wall socket. DO NOT plug the C4630 SE’s
power cord into a convenience outlet on any other audio or video component.
IImmppoorrttaanntt:: DDoo nnoott pplluugg tthhee ppoowweerr ccoorrdd iinnttoo tthhee wwaallll oouuttlleett uunnttiill aallll ssyysstteemm ccoonnnneeccttiioonnss hhaavvee bbeeeenn
mmaaddee aanndd vveerriiffiieedd..
NOTE: If you need to use an extension cord, use only a heavy-duty (14-gauge or larger) extension cord
to avoid starving the C4630 SE of all the current necessary for full-power operation.
SSwwiittcchheedd AACC OOuuttlleettss::
Connect the AC power cords of up to two source components into these outlets. DO NOT modify
power strips to fit these outlets by removing their ground plugs.
Replacing the AC Fuse
The C4630 SE has an 8A, 250V slo-blo AC fuse. To replace the fuse, unplug the power
cord from the Power Cord Connector and use a screwdriver to remove the fuse.
CCAAUUTTIIOONN::
FFoorr
ccoonnttiinnuueedd
pprrootteeccttiioonn
aaggaaiinnsstt
ffiirree,,
rreeppllaaccee
tthhee
ffuussee
wwiitthh
oonnllyy
tthhee
ssaammee
ttyyppee
aanndd
rraattiinngg..
Audio Source Connections
CCAAUUTTIIOONN::
AAllwwaayyss
uunnpplluugg
tthhee
ccoonnttrroolllleerr’’ss
ppoowweerr
ccoorrdd
ffrroomm
tthhee
wwaallll
oouuttlleett
bbeeffoorree
mmaakkiinngg
ssoouurrccee
ssiiggnnaall
oorr
ssppeeaakkeerr
ccoonnnneeccttiioonnss..
The C4630 SE has input and output connections for four source components.
The corresponding S
OURCE INPUT and SOURCE OUTPUT connectors are arranged vertically
(see
Figure 4
). The Source Output connections are buffered.
Source Input Connections
Connect a stereo RCA audio cable from the left & right line-level audio outputs of a
source component to one set of left & right Source Input Jacks on the C4630 SE. You can
connect up to four source components.
CAUTION:
TO
PREVENT
ELECTRIC
SHOCK,
DO
NOT
DEFEAT
THE
THIRD
PRONG
OF
THE
POWER
CORD
PLUG.
L+
L-
R-
R+
COMMON IR OUT
SOURCE INPUTS
SOURCE OUTPUTS
L
R
L
R
Source
Input
#1
Source
Input
#2
Source
Input
#3
Source
Input
#4
Source
Output
#1
Source
Output
#2
Source
Output
#3
Source
Output
#4
Figure 4:
Source Input/Output
Connections