Filter
Top Products
Listening to your system
06
62
en
Setting the Up Mix function
In a 7.1-channel surround system with surround
speakers placed directly at the sides of the listening
position, the surround sound of 5.1-channel sources is
heard from the side. The Up Mix function mixes the
sound of the surround speakers with the surround back
speakers so that the surround sound is heard from
diagonally to the rear as it should be.
1
•Using the Up Mix function is effective when the
speakers in the 7.1-channel surround system are set
up as recommended in the example on page 20.
•Depending on the positions of the speaker s and the
sound source, in some cases it may not be possible
to achieve good results. In this case, set the setting to
OFF.
1 Switch the receiver into standby.
2 While holding down
ENTER
on the front panel,
press
STANDBY/ON
.
The display shows RESET NO .
Use / to select UP MIX ON , and then use /
to select ON or OFF.
3 Press
ENTER
to confirm.
• When set to ON, the UP MIX indicator on the front
panel lights.
Selecting MCACC presets
• Default setting: MEMORY 1
If you have calibrated your system for different listening
positions
2
, you can switch between settings to suit the
kind of source you’re listening to and where you’re sitting
(for example, watching movies from a sofa, or playing a
video game close to the TV).
• While listening to a source, Press
, then
press
MCACC
.
Press repeatedly to select one of the six MCACC presets
3
.
See Data Management on page 106 to check and
manage your current settings.
Note
1 • Set to ON regardless of this setting when playing DTS-HD signals.
• May automatically be set to OFF even when set to ON, depending on the input signal and listening mode.
?
C
SW
FL FR
SL SR
SBL SBR SBL SBR
C
SW
FL FR
SL SR
Up Mix OFF Up Mix ON
STANDBY/ON
INPUT
SELECTOR
PHASE
CONTROL
ADVANCED
MCACC PQLS HDMI
MASTER
VOLUM E
PHONES
SPEAKERS
CONTROL
MULTI-ZONE
ON/OFF
MCACC
SETUP MIC
PARAMETER
ENTER
(TUNE)
(TUNE)
(PRESET)(PRESET)
AUDIO VIDEO
TUNER EDIT
USBHDMI 4
VIDEO CAMERA
iPod
iPhone
AUTO SURR/ALC/
STREAM DIRECT
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND
STEREOBAND
HOME MENU RETURN
2 Different presets might also have separate calibration settings for the same listening position, depending on how you’re using your system.
These presets can be set in Automatically setting up for surround sound (Auto MCACC & Full Band Phase Control) on page 42 or Automatic
MCACC (Expert) on page 96, either of which you should have already completed.
3 • These settings have no effect when headphones are connected.
• You can also press / to select the MCACC preset.
123
HDMI OUT
SLEEPMCACC
INPUT
SELECT
SIGNAL SEL
456
DIMMERA.ATTSBch
789
CLASSCH LEVELD.ACCESS
/CLR
0
ENTER
MCACC
5
REMOTE
SETUP
ZONE 2
MAIN
ZONE 3
ANT
AUDIO
MULTI OPE
INFO
DISP
MPX PQLS
MEMORY
CH
RECEIVER
TV CTRL
RECEIVER
RECEIVER
SC-9540.book 62 ページ ２００９年４月２４日 金曜日 午後１時４２分