Filter
Top Products
Controls and displays
02
13
en
5 Tuner/component control buttons/
HOME MENU
These button controls can be accessed after you have
selected the corresponding input function button (DVD,
DVR, TV, etc.). The BAND and T.EDIT tuner controls are
explained on page 52 and page 52.
Press first to access:
AUDIO PARAMETER – Use to access the Audio
options (page 82).
VIDEO PARAMETER – Use to access the Video
options (page 83).
HOME MENU – Use to access the Home Menu
(pages 42, 44, 80, 95, 104, 106, 108 and 112).
RETURN – Press to confirm and exit the current
menu screen (also use to return to the previous menu
with DVDs or to select closed captioning with DTV).
6
///
(
TUNE
/
PRESET
) /
ENTER
Use the arrow buttons when setting up your surround
sound system (see page 95) and the Audio or Video
options (page 82 or 83). Also used to control DVD menus/
options and for deck 1 of a double cassette deck player.
Use TUNE/ to find radio frequencies and use PRESET
/ to find preset stations (page 52).
7 Component/Receiver control buttons
The main buttons (, , etc.) are used to control a
component after you have selected it using the input
function buttons.
The controls above these buttons can be accessed after
you have selected the corresponding input function
button (for example DVD, DVR or TV). These buttons also
function as described below.
Press TUNER first to access:
MPX
– Switches between stereo and mono reception
of FM broadcasts. If the signal is weak, then switching
to mono will improve the sound quality
(page 52)
.
NOISE CUT MODE 1
or
2
can be selected when this
unit is receiving AM broadcasts.
Press first to access:
AUTO/ALC/DIRECT –
Switches between Auto
Surround
(page 57)
, Auto level control, Optimum
Surround mode and Stream Direct mode
(page 60).
STEREO – Switches between stereo playback and
Front Stage Surround Advance modes (page 60).
STANDARD – Press for Standard decoding and to
switch between the various 2 Pro Logic IIx and
Neo:6 options (page 57).
ADV SURR – Use to switch between the various
surround modes (page 59).
THX – Press to select a Home THX listening mode
(page 58).
PHASE CTRL – Press to switch on/off Phase Control
or Full Band Phase Control (page 63).
STATUS – Press to check selected receiver settings
(page 87).
PQLS – Press to select PQLS setting (page 81).
8
AUDIO – Changes the audio or channel on DVD or
BD discs.
DISP – Switches between named station presets and
radio frequencies.
CH +/– – Use to select channels for DVD/DVR units.
9
REMOTE SETUP
Use to input the preset code when making remote
control settings and to set the remote control mode
(page 89).
10
TV CTRL
Use this button to set preset code of your TV’s
manufacturer when controlling TV (see Selecting preset
codes directly on page 89 for more on this).
11
MULTI-ZONE
operation selector switch
Switch to perform operations in the main zone, ZONE 2
and ZONE 3 (page 85).
12 Remote control LED
Lights when a command is sent from the remote control
(page 89).
13
SOURCE
Press to turn on/off other components connected to the
receiver (see page 89 for more on this).
14
MASTER VOLUME +/–
Use to set the listening volume.
15
MUTE
Mutes the sound or restores the sound if it has been
muted (adjusting the volume also restores the sound).
16
Switches the remote to control the receiver (used to
select the white commands above the number buttons
(A.ATT, etc.)). Also use this button to set up surround
sound.
17
Press to turn on/off the illumination of some of the
buttons.
RECEIVER
RECEIVER
RECEIVER
SC-9540.book 13 ページ ２００９年４月２４日 金曜日 午後１時４２分