Filter
Top Products
The system and the other setup
12
112
en
4 Specify whether your subwoofer is THX Select2
certified or not.
If your subwoofer isn’t THX Select2 certified, but you still
want to switch boundary gain compensation on, select
YES here, but the effect might not work properly.
5 Select either
ON
or
OFF
for Boundary Gain
Compensation (BGC) setting.
6 When you’re finished, press
RETURN
.
You will return to the Manual SP Setup menu.
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
1 Press , then press
HOME MENU
.
A Graphical User Interface (GUI) screen appears on your
TV. Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
2 Select ‘
System Setup
’ from the
HOME MENU
.
3 Select ‘
Other Setup
’, then press
ENTER
.
4 Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
• KURO LINK Setup – Synchronizes this receiver with
your Pioneer component supporting KURO LINK (see
KURO LINK Setup on page 80).
• Multi Ch In Setup –
Specifies the optional settings for
a multi-channel input (
see below
).
• ZONE Audio Setup – Specifies the volume setting
for a MULTI-ZONE setup (page 113).
• Power ON Level Setup – Specifies the volume level
set when the power is turned on (page 113).
• Volume Limit Setup – Limits the maximum volume
(page 113).
• Remote Control Mode Setup – Sets this receiver’s
remote control mode (page 114).
• Flicker Reduction – Adjusts the way the GUI screen
looks (page 114).
5 Make the adjustments necessary for each setting,
pressing
RETURN
to confirm after each screen.
Multi Channel Input Setup
You can adjust the level of the subwoofer for a multi-
channel input. Also, when the multi-channel input is
selected as an input function, you can display the video
images of other input functions. In the Multi Channel
Input Setup, you can assign a video input to the multi-
channel input.
A/V RECEIVER
Exit Finish
4a6.THX Audio Setting
Loudness Plus : ON
SB SP Position : 4 ft<
BGC : OFF
THX Select2 SW : YES
Loudness Plus : ON
SB SP Position : 4 ft<
BGC : OFF
THX Select2 SW : YES
A/V RECEIVER
Exit Finish
4a6.THX Audio Setting
RECEIVER
A/V RECEIVER
Exit Return
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
4.SystemSetup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6.
Remote Control Mode Setup
7.
Flicker Reduction Setup
1. KURO LINK Setup
4d.Other Setup
A/V RECEIVER
Exit Return
SC-9540.book 112 ページ ２００９年４月２４日 金曜日 午後１時４２分