Filter
Top Products
Once again, pressing MENU on the front panel of the C 1,
or rocking the Master remote’s thumbpad down, brings
you to the next option, as shown by the on-screen cursor.
And once again, turning the front-panel knob slightly or
pressing the thumbpad on the Master remote brings up a
list of options. For bass-limiter setup, the display would
read:
Turning the knob a little or rocking the thumbpad to one
side changes the setting or adjusts the function you’ve
selected. For example, “Bass limiter” would go from Off
to On and back to Off again, while “Limiter level” would
change in 1-dB steps from –50 to 0 dB.
If you’ve finished making changes and would like to go to
a different setup, you can save your changes and move
back to a higher menu level by selecting “Exit” from the
current menu, by rocking the thumbpad up or down, or by
turning the front-panel knob, until you reach “Exit”. To exit
the current menu, press the center of the thumbpad or turn the front-panel knob one click. To
save your changes and get out of setup altogether, press the STATUS button on the front panel
or the MENU button on the Master remote. To get out of setup without saving your changes,
press ESC (Escape) on the Master remote.
Each of the six setup titles in the Main Menu is the heading for a separate submenu; each sub-
menu includes a number of control options or sub-submenus, which are described individually
in the pages that follow.
Main Menu
᭤ Audio setup
Speaker setup
Source setup
Display setup
Trigger setup
THX Audio setup
Exit
Bass limiter setup
᭤ Bass limiter Off
Limiter level —9dB
Limiter noise Off
Exit
Audio setup
᭤ Dolby/DTS setup
Bass limiter setup
Preset setup
Treble 0dB
Bass 0dB
LFE level –2dB
Reverb Dry
Exit
ADJUSTMENTS, MENUS, AND SETUP continued
24