Filter
Top Products
56
Section 4 Configure
Configure a Default Server
This feature allows you to direct unsolicited or non-specific traffic to a des-
ignated LAN station. With NAT “On” in the Gateway, these packets nor-
mally would be discarded.
For instance, this could be application traffic where you don’t know (in
advance) the port or protocol that will be utilized. Some game applications
fit this profile.
Use the following steps to setup a NAT default server to receive this infor-
mation:
Step 1 Select the
Configure
toolbar button, then
Advanced
, then the
Default Server
link.
Step 2 Check the
Enable Default Server
checkbox. The NAT Server IP Address field
appears.
Step 3 Determine the IP address of the LAN computer you have chosen to receive
the unexpected or unknown traffic. Enter this address in the NAT Server IP
Address field.
Step 4 Click the
Submit
button.
Step 5 Click the
Alert
button.
Step 6 Click the
Save and Restart
link to confirm.
NAT Default Server capability is not available over SafeHarbour IPsec.