Filter
Top Products
120
Appendix A About CONFIG Commands
Dogzilla (top)>> set system
Stepping set mode (press Control-X <Return/Enter> to
exit)
...
system
name (“Dogzilla”): Mycroft
Diagnostic Level (High): medium
Stepping mode ended.
Validating Your Configuration
You can use the validate CONFIG command to make sure that your configura-
tion settings have been entered correctly. If you use the validate command,
the Cayman Gateway verifies that all required settings for all services are present
and that settings are consistent.
Dogzilla (top)>> validate
Error: Subnet mask is incorrect
Global Validation did not pass inspection!
You can use the validate command to verify your configuration settings at any
time. Your Cayman Gateway automatically validates your configuration any time
you save a modified configuration.