Filter
Top Products
51
Section 4 Configure
Step 9 Click on the
Pinholes
link in the Breadcrumb Trail to go to the Pinholes entry
page. Review your entries to be sure they are correct.
Step 10 Click the
Alert
button.
Step 11 Select the
Save and Restart
link to complete the entire Pinhole creation task
and ensure that the parameters are properly saved.
Note the following parameters for the “my-games” Pinhole:
1. The Protocol ID is UDP.
2. The external port is specified as a range.
3. The Internal port is specified as the lower range entry.
REMEMBER: When you have re-assigned the port address for the
embedded Web server, you can still access this facility.
Use the Gateway’s WAN address plus the new port number.
In this example it would be
<WAN Gateway address>:<new port number> or, in this case,
210.219.41.20:8100