Filter
Top Products
139
Appendix A CONFIG Commands
Specifies the name the Cayman Gateway sends in a CHAP response packet. The
chap_name argument is 1-64 alphanumeric characters. The information you
enter must match the CHAP username configured in the remote PPP peer's
authentication database.
Specifies the CHAP secret for CHAP authentication. The secret argument is 1-64
alphanumeric characters. The information you enter must match the CHAP secret
used by the PPP peer.
Specifies whether PAP authentication is enabled for a port. By default, PAP
authentication is turned off. PAP authentication must be enabled before you can
enter other PAP information. If you disable PAP authentication and save the modi-
fied configuration, your Cayman Gateway retains its PAP settings.
Specifies the name the Cayman Gateway sends in a PAP response packet. The
pap_name argument is 1- 64 alphanumeric characters. The information you enter
must match the PAP username configured in the PPP peer's authentication data-
base.
Specifies the password the Cayman Gateway sends when a PPP peer sends a PAP
authentication request. The password argument is 1-64 alphanumeric characters.
The information you enter must match the PAP password used by the PPP peer.
BOTH set PPP module [vccn] port-authentication
chap-name
chap_name
BOTH set PPP module [vccn] port-authentication
chap-secret
secret
BOTH set PPP module [vccn] port-authentication
pap-option { on | off }
BOTH set PPP module [vccn] port-authentication
pap-name
pap_name
BOTH set PPP module port-authentication
pap-password
password