Filter
Top Products
49
Section 4 Configure
Pinhole Configuration Procedure
Use the following steps:
Step 1 From the
Configure
toolbar button ->
Advanced
link, select the
Internal
Servers
link.
Since Port Forwarding is required for this example, the Cayman embedded Web
server is configured first.
To pass Web traffic through to your LAN station(s), select a Web (HTTP)
Port number that is greater than 1024. In this example, you choose 8100.
Step 2 Type
8100
in the Web (HTTP) Server Port text box.
Step 3
Step 4 Click the
Submit
button.
Step 5 Click
Advanced
. Select the
Pinholes
link to go to the Pinhole page.
The two text boxes, Web (HTTP) Server Port and Telnet Sever Port, on this
page refer to the port numbers of the Cayman Gateway’s embedded admin-
istration ports.