Filter
Top Products
112
Appendix A SHELL Commands
Releases the DHCP lease the Gateway is currently using to acquire the IP settings
for its WAN (Ethernet B) port.
Releases the DHCP lease the Cayman 3220-H is currently using to acquire the IP
settings for the specified DSL port. The
vcc-id identifier is a letter in the rang B-
I. Enter the
reset dhcp client release without the variable to see the
letter assigned to each virtual circuit.
Renews the DHCP lease the Gateway is currently using to acquire the IP settings
of its WAN (Ethernet B) port.
Releases the DHCP lease the Cayman 3220-H is currently using to acquire the IP
settings for the specified DSL port. The vcc-id identifier is a letter in the rang B-
I. Enter the
reset dhcp client release without the variable to see the
letter assigned to each virtual circuit.
Clears the DHCP lease table in the Cayman Gateway.
Resets any open DSL connection.
Resets Ethernet statistics to zero
Clears all entries in the host name table. Thereafter, when PCs configured as
DHCP clients use the Gateway, new entries will be rebuilt. DHCP serving must be
enabled.
Clears the IPMap table (NAT).
Rewinds the diagnostic log display to the top of the existing Cayman Gateway
diagnostic log. The reset log command does not clear the diagnostic log. The
next show log command will display information from the beginning of the log
file.
Resets the point-to-point connection over the WAN interface. When you issue a
reset ppp command, the Cayman 2E-H closes any PPP session (including PPP
over Ethernet).
ENET reset dhcp client release { B | all }
DSL reset dhcp client release [
vcc-id
]
ENET reset dhcp client renew { B | all }
DSL reset dhcp client renew [
vcc-id
]
BOTH reset dhcp server
DSL reset dsl
BOTH reset enet
BOTH reset hosts
BOTH reset ipmap
BOTH reset log
ENET reset ppp [enet-B]