Filter
Top Products
140
Appendix A CONFIG Commands
Configuring Peer Authentication
You can specify that your Cayman Gateway will use PAP, CHAP, or both to authen-
ticate a remote peer as a PPP link is being completed. Perform the following steps
to specify how your Cayman Gateway should authenticate remote peers.
Specifies whether the Cayman Gateway will use CHAP to authenticate connec-
tions to PPP peers.
Specifies whether the Cayman Gateway will use PAP to authenticate connections
to PPP peers.
Specifies the hostname for an authorized PPP peer. The hostname argument is 1-
64 alphanumeric characters. The information you enter must match the user-
name that will be returned by the PPP peer when it is being authenticated.
Specifies the secret associated with a PPP peer. The secret argument is 1-64 alpha-
numeric characters. The information you enter must match the secret that will be
returned by the PPP peer when it is being authenticated.
Specifies the password associated with a PPP peer. The password argument is 1-
64 alphanumeric characters. The password you enter for that peer must match
the password that will be returned by the PPP peer when it is being authenti-
cated.
BOTH set PPP module [vccn] peer-authentication
chap-option { on | off }
BOTH set PPP module [vccn] peer-authentication pap-option { on | off }
BOTH set PPP peer-database
peer-name
hostname
BOTH set PPP peer-database
peer-name
hostname
chap-secret
secret
BOTH set PPP peer-database peer-name hostname pap-password
password