Marantz SR9600 Home Theater System User Manual


  Open as PDF
of 68
 
ENGLISH
60
NAME INPUT OF THE PRESET STATION
This function allows the name of each preset
channel to be entered using alphanumeric
characters.
Before inputting names, you need to store preset
stations with the preset memory operation.
1.
Recall the desired preset number with the
method described in “RECALLING A
PRESET STATION”.
2.
Press the MEMORY button on the front panel
or press the Memo on the remote for more
than 3 seconds.
3.
The leftmost column of the station name
indicator flashes, indicating the character
entry ready status.
4.
When press the cursor / buttons on the
front panel or the cursor
/ buttons are
pressed on the remote control unit alphabetic
and numeric characters will be displayed in
the following order:
A
→→
→→
→ B
→→
→→
→ C ...Z
→→
→→
→ 1
→→
→→
→ 2
→→
→→
→ 3..... 0
→ →
→ →
→ –
→ →
→ →
→ +
→→
→→
→ /
→→
→→
→ (Blank)
→ →
→ →
→ A
UP
→→
→→
→
←←
←←
← DOWN
SORTING PRESET STATIONS
If you have stations memorized, and there is a gap
in the sequential order:
e.g., the stations are stored as follows
1) 87.1 MHz
2) 93.1 MHz
3) 94.7 MHz
10) 105.9 MHz
(notice there are no stations programmed for
presets for 4-9), you can have pre set 10 become
preset 4:
To sort the numbers, press and hold the MEMORY
and the F/P buttons.
“PRESET SORT” will appear on the display and
sorting will be done.
MULTIMULTI
SPEAKERSPEAKER
F/PF/PBANDBANDTHXTHXPURE DIRECTPURE DIRECT UPUP
DOWNDOWN
TUNINGTUNING
AUX 1 INPUTAUX 1 INPUT
RRAUDIOAUDIO
DIGITALDIGITAL S-VIDEOS-VIDEO
LLVIDEOVIDEO
POWER ON/STANDBYPOWER ON/STANDBY
VOLUMEVOLUME
UPUPDOWNDOWN
INPUT SELECTORINPUT SELECTOR
PHONESPHONES
STANDBYSTANDBY
AV SURROUND RECEIVER SR9600AV SURROUND RECEIVER SR9600
SURROUNDSURROUND
MICMIC
ENTERENTER
MENUMENU
PURE DIRECTPURE DIRECTTHXTHX
7.1CH INPUT7.1CH INPUT
MODEMODE AUTOAUTO
MULTIMULTI
A/BA/B
T-MODET-MODE
MEMORYMEMORY CLEARCLEAR
DISPLAYDISPLAY
EXITEXIT
SPEAKERSSPEAKERS
MRACMRAC
AUTO TUNEAUTO TUNE
4.2. 5. 6.
4.
5.
MULTIMULTI
SPEAKERSPEAKER
F/PF/PBANDBANDTHXTHXPURE DIRECTPURE DIRECT UPUP
DOWNDOWN
TUNINGTUNING
AUX 1 INPUTAUX 1 INPUT
RRAUDIOAUDIO
DIGITALDIGITAL S-VIDEOS-VIDEO
LLVIDEOVIDEO
POWER ON/STANDBYPOWER ON/STANDBY
VOLUMEVOLUME
UPUPDOWNDOWN
INPUT SELECTORINPUT SELECTOR
PHONESPHONES
STANDBYSTANDBY
AV SURROUND RECEIVER SR9600AV SURROUND RECEIVER SR9600
SURROUNDSURROUND
MICMIC
ENTERENTER
MENUMENU
PURE DIRECTPURE DIRECT THXTHX
7.1CH INPUT7.1CH INPUT
MODEMODE AUTOAUTO
MULTIMULTI
A/BA/B
T-MODET-MODE
MEMORYMEMORY CLEARCLEAR
DISPLAYDISPLAY
EXITEXIT
SPEAKERSSPEAKERS
MRACMRAC
AUTO TUNEAUTO TUNE
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
1.
Recall the preset number to be cleared with
the method described in “RECALLING A
PRESET STATION”.
2.
Press the MEMORY button on the front panel
or tap the Memo on the remote control unit.
3.
The stored preset number blinks in the display
for 5 seconds. While blinking, press the
CLEAR button on the front panel or tap the
CLR on the remote control unit.
4.
“xx CLEAR” appears on the display to
indicate that the specified preset number has
been cleared.
Note:
•
To clear all stored preset stations, press and hold the
CLEAR and the F/P buttons for two seconds.
MULTI
SPEAKER
F/PF/PBANDBANDTHXPURE DIRECT UP
DOWN
TUNING
AUX 1 INPUTAUX 1 INPUT
RRAUDIOAUDIO
DIGITALDIGITAL S-VIDEOS-VIDEO
LLVIDEOVIDEO
POWER ON/STANDBY
VOLUMEVOLUME
UPUPDOWNDOWN
INPUT SELECTOR
PHONES
STANDBY
AV SURROUND RECEIVER SR9600
SURROUND
MICMIC
ENTER
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
A/BA/B
T-MODET-MODE
MEMORYMEMORY CLEARCLEAR
SPLAYDISPLAY
EXITEXIT
SPEAKERSSPEAKERS
MRACMRAC
EAUTO TUNE
3.2.
To erase the character, press the CLEAR
button or tap the CLR on the remote control
unit.
5.
After selecting the first character to be
entered, press the MEMORY button on the
front panel or press the OK / ENTER button.
The entry in this column is fixed and the next
column starts to flash. Fill the next column
using the same method.
To move back and forth between the
characters, rotate the GYRO TUNING dial or
press
or cursor buttons on the remote
control unit.
Note:
Unused columns should be filled by entering
blanks.
6.
To save the name, press the MEMORY button
or the OK button on the remote control unit for
more than 2 seconds.
2/2 Tuner 1
Tuner 1 : Key/RDS
wed Jun 01 4:40
pm
2.
3.
2/2 Tuner 1
Tuner 1 : Key/RDS
wed Jun 01 4:40
pm
2. 4.
Numeric keypad Display
1A
→
B
→
C
→
1
→
A
2D
→
E
→
F
→
2
→
D
3G
→
H
→
I
→
3
→
G
4J
→
K
→
L
→
4
→
J
5M
→
N
→
O
→
5
→
M
6P
→
Q
→
R
→
6
→
P
7S
→
T
→
U
→
7
→
S
8V
→
W
→
X
→
8
→
V
9Y
→
Z
→
space
→
9
→
Y
0 –
→
+
→
/
→
0
05.4.27, 5:48 PMPage 60
 previous next