Marantz SR9600 Home Theater System User Manual


 
15
ENGLISH
TUNER 1/2
TUNER 1/2 : MAIN (PAGE 1/2)
1/2 Tuner 1
Tuner 1 : Main
wed Jun 01 4:40
pm
1/2 Tuner 2
Tuner 2 : Main
wed Jun 01 4:40
pm
AM/FM
These buttons are used to switch between the the
FM and AM mode of the tuner.
Tuning ( :up / : down)
These buttons are used to change the frequency.
Preset ( :up / : down)
These buttons are used to change the preset
station.
Stereo/Mono
This button is used to set the FM tuning mode, auto
stereo or mono.
P-Scan (Preset Scan)
This button is used to start scaning automatically
through preset stations in the receiver's memory.
Info.
This button is used to display a list of preset
stations on the
OSD menu system
.
Power on and off
These buttons are used to turn the SR9600 on or
off.
TUNER 1/2 : KEY/RDS (PAGE 2/2)
2/2 Tuner 1
Tuner 1 : Key/RDS
wed Jun 01 4:40
pm
2/2 Tuner 2
Tuner 2 : Key
wed Jun 01 4:40
pm
Ten-digit keypad (0, 1 - 9)
These buttons are used to change the preset
station name or input a frequency directly.
Memo
This button is used to enter the tuner's preset
memory numbers and station names.
CLR (Clear)
This button is used to cancel certain memory or
programming operations.
Frequency Direct
This button is used to select the mode of frequency
direct input.
RDS Disp.
(Europe model only)
RDS PTY
(Europe model only)
RECORDING MACROS
A macro allows you to send a sequence of
commands using a single button. You can, for
instance, switch on your TV, turn to a movie channel
and prepare your VCR for recording by rewinding
the videotape all from a single button on your
RC3200B.
To record macros, the RC3200B has to be in the
Macro mode.
1.
Set the RC3200B to the Use Mode. See
WORKING WITH MODES”. (see page 17)
2.
Press the Home button.
1/4 Home
wed Jun 01 4:40
pm
3.
Tap the MACRO.
The Macro screen appears.
1/2 -- MACRO --
Macros 1
wed Jun 01 4:40
pm
2/2 -- MACRO --
Macros 2
wed Jun 01 4:40
pm
4.
Press and hold the Mode button for 3 seconds.
The Mode screen appears.
5.
Tap the MACRO on the Mode screen.
A message screen appears.
The RC3200B is now in the Macro mode.
6.
Tap Next.
The device screen with Macro labels appears.
Press the page up and page down buttons to
go to other screens of the selected device.
05.4.27, 9:03 PMPage 15