Filter
Top Products
17
ENGLISH
ADJUSTING THE SETTINGS
The RC3200B settings can be adjusted in the
Setup mode.
1.
Press and hold the Mode button for 3 seconds.
The Mode screen appears.
2.
Tap
the
Setup on the Mode screen.
The first Setup page appears.
The RC3200B settings consist of 3 setup pages
with several settings per page.
Use the page up and page down buttons to
navigate to the appropriate setup page.
FIRST SETUP PAGE
On the first setup page you can adjust:
• LCD (LCD timeout)
• Backlight (backlight timeout)
• Beep volume
Adjust the LCD timeout
The LCD timeout indicates how long the LCD
touch screen stays active before it turns off.
The LCD will only time out when you don't touch
any buttons.
You can set the timeout between 1 second and
120 seconds.
Press “+” to increase or “–” to decrease the time
the LCD stays active.
1.
Tap “+” or “–” once to adjust the timeout 1
second up or down.
2.
Press and hold “+” or “–” to adjust the timeout
in 10 second increments up or down.
Adjust the backlight timeout
The backlight setting indicates how long the
backlight of the LCD touch screen and the buttons
stay active.
The backlight timeout can be set between 1
second and 120 seconds.
WORKING WITH MODES
RC3200B starts up in the Use mode. This mode is
for operating devices. For customizing the
RC3200B (adjusting the settings, learning buttons
or recording macros), you have to switch to the
appropriate mode.
Note:
• When switching between modes, you will always
return to the last active screen.
The RC3200B can be put into 4 different modes.
These modes are:
Use mode: For operating your devices. See
“OPERATING DEVICE” for more
details.
Setup mode: For changing the RC3200B system
settings. See “ADJUSTING THE
SETTEING” for more details.
Learn mode: For learning commands from other
remote controls. See “LEARNING
COMMANDS” for more details.
Macro mode: For recording macros. You can
assign multiple commands to a
single button. See “RECORDING
MACROS” for more details.
Note:
•
Learning commands and recording macros is only
possible per device. This means that you first have
to select a specific device to perform these actions.
1.
On the Home screen tap the soft button of the
device you want to customize.
The first page of the selected device appears.
2.
Press and hold the Mode button for 3 seconds.
The Mode screen appears.
Note:
You have to press and hold the Mode button for 3
seconds to prevent accidental changes.
3.
Select the desired mode from the Mode
screen.
Note:
• When you switch to another mode from the Home
screen, you cannot choose the Learn mode and
Macro mode. To switch to these modes you first
have to go to the specific device you want to
customize.
Note:
• The backlight cannot stay active longer than the
LCD. If you increase the backlight timeout, the
LCD timeout will automatically increase as well.
Press “+” to increase or “–” to decrease the time
the backlight stays active.
1.
Tap “+” or “–” once to adjust the timeout 1
second up or down.
2.
Press and hold “+” or “–” to adjust the timeout
in 10 second increments up or down.
Note:
• When the settings for the LCD timeout and the
backlight timeout are high, the battery lifetime
may be reduced.
Change the Beep Volume
The beep volume setting adjusts or turns off the
volume of all button and system beeps on the
RC3200B. The beep volume levels are mute, soft,
medium and loud.
1.
Press “+” to increase or “–” to decrease the
beep volume.
SECOND SETUP PAGE
On the second setup page you can adjust:
• Date
• Time
Adjust the Date
You can set the year, the month and the day in the
date settings.
Press “+” to increase or “–” to decrease the value
for the year, month and day.
1.
Tap “+” or “–” once to adjust the year, month
and day one value up or down.
2.
Press and hold “+” or “–” to adjust the values
for the year and the month more rapidly. The
value for the day settings will change in 5 day
increments.
The RC3200B will immediately reflect the date
change at the top of the screen.
05.4.27, 5:37 PMPage 17