Filter
Top Products
30
ENGLISH
SETUP
After all components are connected, initial setup
must be performed.
ONSCREEN DISPLAY MENU SYSTEM
The SR9600 incorporates an onscreen menu
system, which makes various operations possible
by using the cursor ( , , , ) and OK/ENTER
buttons on the remote control unit or on the front
panel.
Note:
•
To view the onscreen displays, make certain you
have connected the MONITOR OUT jack on the
rear panel to the composite, S-Video or component
video input of your TV or projector. (See page 23)
1.
Tap the A/V Amp on the remote control unit.
(This step is not needed when operating the
setup menus from the SR9600.)
2.
Press the M button on the remote control or
press the MENU button on the front panel.
The “MAIN MENU” of the OSD menu system
is displayed.
There are 7 items in the MAIN MENU.
3.
Select the desired sub-menu with the
or
cursor buttons and press the OK/ENTER
button. The display will change to the selected
sub-menu.
Notes:
• If you desire to adjust any sub-menu, you need to
set it to UNLOCKED.
• To lock sub-menus, set items 1-7 on the MAIN
MENU to “LOCKED”.
<Example>
(1) With “1. INPUT SETUP” selected, press the
cursor button to select “UNLOCK”.
(2)
Select “LOCKED” with the or cursor buttons.
(3) Press the cursor button to enter the setting. A
“
•
” will appear to the right of “LOCKED”.
(4) “7. AUDIO STATUS” cannot be set to
“LOCKED”.
4.
To exit from OSD menu system, press the
EXIT button, or move the cursor to EXIT and
press the OK/ENTER button.
Note:
• Settings are entered with the ENTER button on
the unit or the OK button on the remote control
unit. When using the remote control unit, use the
OK button as if it were the ENTER button.
SR9600 FRONT BUTTON CONTROL
RC3200B BUTTON CONTROL
Ex
M
S
VOL
CH
OK
M (Menu) button
Press this button to display the
OSD menu system.
Ex (Exit) button
Press this button to exit the
OSD menu system.
UP button
RIGHT button
DOWN button
OK button
LEFT button
MULTIMULTI
SPEAKERSPEAKER
F/PBANDTHXPURE DIRECT UP
DOWN
TUNING
AUX 1 INPUT
RAUDIO
DIGITAL S-VIDEO
LVIDEO
POWER ON/STANDBY
VOLUME
UPDOWN
INPUT SELECTOR
PHONES
STANDBY
AV SURROUND RECEIVER SR9600
SURROUND
MICMIC
ENTERENTER
MENUMENU
PURE DIRECT THXTHX
7.1CH INPUT7.1CH INPUT
MODE AUTOAUTO
MULTIMULTI
A/B
T-MODET-MODE
MEMORYMEMORY CLEAR
DISPLAYDISPLAY
EXITEXIT
SPEAKERS
MRACMRAC
AUTO TUNEAUTO TUNE
UP button
RIGHT button
DOWN button
MENU button
Press this button to display the
OSD menu system.
EXIT button
Press this button to exit the
OSD menu system.
LEFT button
ENTER button
05.4.27, 5:40 PMPage 30