Filter
Top Products
Troubleshooting CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
Error messages 89
Message: component is attached
metattach:
hostname
: d21: growing of
metadevice delayed
Explanation: Submirrors are out of sync.
Response: Enter the command:
metasync d21
This command effectively resyncs submirrors.
Message:
device:
devicename
cannot be setup or does
not exist
Explanation: The device named is a CD-ROM drive or is not available
and will not be used in the
Solstice DiskSuite
setup.
Response: Verify that the device should not be used.
Message:
device:
devicename
will not be used
Explanation: The device named is a CD-ROM drive or is not available
and will not be used in the
Solstice DiskSuite
setup.
Response: If the device is c0t6d0, it is a CD-ROM drive and no
further action is required. If the device is a disk, verify the
sanity of the message: check device availability, for
example, or use a
format
command to view partition
sizes, etc.
Message:
disk
diskname
already setup, exiting...
Explanation: You are trying to attach a disk that is already attached or
is part of the base configuration. No response is
necessary.
Message:
disk:
diskname
slice 1 is not partitioned
correctly
Explanation: Disk is partitioned incorrectly, or the
olds
script was run
without the
-mirrored
option.
Response: Try rerunning the command with the -mirrored option. If
that doesn’t work, repartition the disk.
If
diskname
is the primary boot disk, you must reload
Solaris,
repartitioning the disk correctly in the process. If
diskname
is not the primary boot disk, you can repartition
it with the
Solaris
format
command.
Error Messages (Continued)