Filter
Top Products
Maintaining Mirrored Systems CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
Partitioning disks with the format command 77
6. Enter:
partition> print
The partition table displays and the
partition>
prompt returns.
Compare the display to the
Partitioning
table to make certain you
have repartitioned the disk properly. If not, repeat step 5.
7. Enter:
partition> label
The system responds
Ready to label disk, continue?
.
8. Enter:
y
9. The
partition>
prompt returns.
10. Enter:
partition> q
The
format>
prompt displays.
11. To select another disk to partition, enter:
format> disk
and return to item 2.
To quit, enter:
format> q
and continue with the next step.
12. When the system prompt returns, verify the partitioning.
You can verify the exact partitioning of the new disk with an
olds -mirrored -check_disks
command. For example:
# olds -mirrored -check_disks c0t2d0
scsi=c1
number of external scsi controllers with disks
is = 1
number of disks is = 6
valid disks are c0t2d0
disk:c0t2d0 is partitioned ok
#