Filter
Top Products
Maintaining Mirrored Systems CentreVu CMS Release 3 Version 8 Disk-Mirrored Systems
Restoring specific files from a CMSADM backup 62
Restoring specific files from a CMSADM backup 3
To restore specific files from CMSADM backup tapes, enter the following
commands at the system prompt (for example):
(where
<full_path_name>
is the full path name of the file to be restored)
Note the device name in the example
(/dev/rmt/0c).
That name is usually
correct. Some other device name may be required, however, depending
upon the drive’s SCSI ID and compression capability. Tape device names
are as follows:
/dev/rmt/0
The internal, noncompressing tape drive (14-GB,
8-mm drive) with the lowest target address.
/dev/rmt/1
The external, noncompressing tape drive (QIC-150
or 5-GB, 8-mm drive) with the second lowest target
address.
/dev/rmt/0c
The internal, compression-capable tape drive
(usually a 14-GB or 40-GB) with the lowest target
address.
/dev/rmt/1c
The external, compression-capable tape drive
(either a QIC 2.5-GB or a 14-GB tape drive) with
the second lowest target address.
#cd/
# cpio -icmudv -C 10240 -I /dev/rmt/0c -M “Please
remove the current tape, insert tape number %d, and
press ENTER”
<full_path_name>