Filter
Top Products
94
Using the Remote Controller with Other Components
—Continued
With the Macro function you can program the remote
controller to perform a sequence of actions with one
press of a button. For example, normally you need to per-
form the following actions to use a CD player that’s con-
nected to the DTR-8.4:
1. Press the scroll wheel, (to select AMP mode).
2. Press the [On] button (to turn on the DTR-8.4).
3. Roll the scroll wheel to select CD (to select the CD
remote controller mode and the CD input source).
4. Press the Play [ ] button (to start the CD
player).
With the Macro function you can program the remote
controller to do all of this with one press of a button.
Making Macros
You can make up to eight macros, and each macro can
perform up to eight actions.
Using Macros
1
Press and hold the [Custom] but-
ton for more than three seconds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
“MACRO,” and then press the
scroll wheel.
3
Roll the scroll wheel to select
“EDIT,” and then press the scroll
wheel.
4
Roll the scroll wheel to select a
macro, and then press the scroll
wheel.
Macros are numbered from 1 to 8.
5
On the remote controller, press
the buttons whose actions you
want to program into the macro
in the order you want them per-
formed.
To program the CD example in the left
column into a macro: press the scroll
wheel, press the [On] button, roll the
scroll wheel to select CD, press the
scroll wheel, and then press the Play
[] button.
Actions are numbered from 1 to 8.
After each button is pressed, “SET” fol-
lowed by “KEY” is displayed.
To add an action that selects an input
source for the main room or Zone 2,
press the [Input] button or [Zone 2] but-
ton, respectively, roll the scroll wheel to
select the input source, and then press
the scroll wheel.
6
When you’ve finished, press the
[Macro] button.
After the following appears on the dis-
play, the display returns to normal.
Macro #1 selected
Action #1
Macro #1 selected
8 actions learnt