39
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
|ENTER|Quit:|SETUP|
→
Advanced Menu
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
|ENTER|Quit:|SETUP|
→
Basic Menu
5.Network Setup
1.IP Address
2.Proxy Setup
3.MAC Address
4.Client Setup
→
Save Settings
|ENTER|Quit:|SETUP|
4.Preference
1.Volume Setup
3.OSD Setup
4.OSD Position
2.Headphones Level
|ENTER|Quit:|SETUP|
3.Audio Adjust
9.THX
10.Mono Movie
11.Enhance
12.Orchestra
13.Unplugged
14.Studio-Mix
15.TV Logic
→
default
3.Audio Adjust
1.Tone Control
2.Surround Speakers
3.Sound Effect
4.Delay
5.LFE Level
6.Mono
7.Theater-Dimensional
8.Surround
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.IntelliVolume
6.Listening Mode Preset
7.12V Trigger
|ENTER|Quit:|SETUP|
Input:DVD
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
|ENTER|Quit:|SETUP|
0.Hardware Setup
1.Speaker Impedance
2.Surr Back/Zone2
3.Remote Setup
4.TV Format
|ENTER|Quit:|SETUP|
Main menus
Submenus
Basic Setup
Pages
Advanced Setup
Pages
p.48
p.40
p.86
p.49
p.41
p.43
p.44
p.45
p.46
p.63
p.73
p.74
p.67
p.68
p.72
p.72
p.73
p.73
p.83
p.83
p.68
p.72
*
1
*
1
Australian model only
–
Basic Setup
This chapter explains the settings that you should make before using the DTR-8.4.
The onscreen setup menus (OSD) are used to configure the DTR-8.4. They appear on the TV connected to the DTR-8.4,
and their large size makes them easy to use.
Settings are divided into two groups: basic and advanced.
Since the advanced menus contain all of the available settings, in this manual, the advanced menus are used in the
explanations. All of the Basic menus are included in the Advanced menus.
To get to the Advanced Menu from the Basic
Menu, use the Down [ ] button to select
“Advanced Menu,” and then press the [Enter]
button. To get to the Basic Menu from the
Advanced Menu, use the Down
[] button to select “Basic
Menu,” and then press the [Enter]
button.
About the Onscreen Setup Menus