Filter
Top Products
51
Basic Operation
This section explains how to select the AV component that you want to listen to or watch.
Selecting the Source AV Component
Display
Audio
Selector
Direct/
Pure Audio
Master Volume
Standby/On
Video 1
Video 3 Tape
Tuner Phono Net AudioCD
DVD
Video 2
VCR 1
VCR 2
Video 4 Video 5
Zone 2
()
GRN
Rec
()
RED
Pure Audio psamplingU
Standby
Push To Open
DTR
-
8.4
3
3
1
1
1
Use the input selector buttons to select the AV component.
On the remote controller, roll the scroll wheel to select the input
source and remote controller mode.
Note:
If neither the [Input] nor [Mode] button is illuminated, the input source and
remote controller mode are selected simultaneously. If either button is illumi-
nated, press that button first.
2
Start playback on the selected AV component.
When you select DVD or another video source component, on your TV you’ll
need to select the video input to which the DTR-8.4 is connected.
On some DVD players, you might need to turn on the digital output.
3
To adjust the volume, use the MASTER VOLUME control, or the
remote controller’s [VOL] button.
The volume can be set from 0 to 100.
The DTR-8.4 is designed for home theater enjoyment. It has a wide volume
range, allowing precise adjustment.
Video 1
Video 3
Tape
Tuner Phono
Net AudioCD
DVD
Video 2
Video 4 Video 5
or
Remote
controller
DTR-8.4
Master Volume
or
Remote
controller
DTR-8.4