Filter
Top Products
4.3 Wiring ST 3000 Transmitter, Continued
Summary, continued
Barriers can be installed per manufacturer’s instructions for transmitters
to be used in intrinsically safe applications.
Figure 14 ST 3000 Transmitter Terminal Block
-
S
I
G
N
A
L
+
+
-
T
E
S
T
Terminal
Block
Electronics
Housing
Internal
Ground
Terminal
3-Screw Terminal Block
+
+
-
-
L-
S
I
G
N
A
L
M
E
T
E
R
T
E
S
T
S
I
G
N
A
L
-
+
+
-
Terminal
Block
Electronics
Housing
Internal
Ground
Terminal
5-Screw Terminal Block
Lightning Protection Option (LP)
TPS reference
Transmitters that are to be digitally integrated to Honeywell’s TPS
system will be connected to the Smart Transmitter Interface Module in
the Process Manager, Advanced Process Manager or High Performance
Process Manager through a Field Termination Assembly. Details about
Honeywell’s TPS system connections are given in the PM/APM
Smartline Transmitter Integration Manual PM12-410 which is part of
the TDC 3000
X
system bookset.
Allen-Bradley PLC
If you are digitally integrating the ST 3000 to an Allen Bradley PLC, the
same FTA and wiring procedures used with Honeywell’s TPS system
are also used with the Allen-Bradley 1771 and 1746 platforms.
For more information, contact:
ProSoft Technology, Inc.
(800) 326-7066 or
http://www.psft.com
Continued on next page
40 ST 3000 Release 300 Installation Guide 2/05