Honeywell ST 3000 Satellite Radio User Manual


 
10/04 34-ST-99-36 (Addendum to 34-ST-33-39) 3 of 10
Marking,
ATEX Directive
Honeywell’s Model ST 3000 Smart Pressure Transmitter, with the following
nameplates attached, has been certified to comply with Directive 94/9/EC of the
European Parliament and the Council as published in the Official Journal of the
European Communities No. L 100/1 on 19-April-1994.
The following information is provided as part of the labeling of the transmitter:
Name and Address of the manufacturer: Honeywell, Phoenix, AZ 85053 USA.
Notified Body identification: KEMA Quality B.V., Arnhem, the Netherlands
For complete model number, see the Model Selection Guide for the particular
model of pressure transmitter.
The serial number of the transmitter is located on the Meter Body data-plate. The
first two digits of the serial number identify the year (02) and the second two digits
identify the week of the year (23); for example, 0223xxxxxxxx indicates that the
product was manufactured in 2002, in the 23
rd
week.
Apparatus Marked
with Multiple
Types of
Protection
The user must determine the type of protection required for installation the
equipment. The user shall then check the box [D] adjacent to the type of protection
used on the equipment certification nameplate. Once a type of protection has been
checked on the nameplate, the equipment shall not then be reinstalled using any of the
other certification types.
Nameplate 51452473-001, ia, 4-20 mA / DE, is mounted on the enclosure. The following is a representation
of this nameplate:
Nameplate 51452474-001, d, 4-20 mA / DE, is mounted on the enclosure. The following is a representation
of this nameplate: