Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting Specifications
About the RESTORER function
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 AAC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals.
• This is displayed on the GUI menu and can be set when the input
source is set to “XM”, “HD Radio” or “NET/USB”, or when analog
signals (including AM/FM signals) or PCM signals (fs = 44.1/48
kHz) are input.
[Selectable items]
OFF
Mode1
(RESTORER 64)
Mode2
(RESTORER 96)
Mode3
(RESTORER HQ)
The default setting for “NET/USB” and “iPod” is “Mode3”. All others
are set to “OFF”.
g RESTORER
This function restores compressed audio signals to how they
were before compression and corrects the sense of volume of
the bass and treble to obtain richer playback sound.
Operating from the main unit or main remote
control unit
During playback, press the RESTORER button on the main unit or the
RSTR button on the main remote control unit.
When set to something other than “OFF”, “ ” is displayed.
Mode 1
(RESTORER 64)
Mode 2
(RESTORER 96)
Mode 3
(RESTORER HQ)
OFF
d Room EQ
Select room equalizer for current environment.
[Selectable items]
Audyssey
: Optimize frequency response of all speakers.
Audyssey Byp. L/R
: Optimize frequency response of speakers
except front L and R speakers.
Audyssey Flat
: Optimize frequency response of all speakers to
flat response.
Manual
: Apply frequency response set with “Manual
EQ” (vpage 34).
OFF
: Turn equalizer off.
Operating from the main unit or main remote
control unit
Press the ROOM EQ button on the main unit or the EQ button on the
main remote control.
Audyssey
Audyssey Byp. L/R
Audyssey Flat
Manual
OFF
When “Audyssey” is selected, “ ” lights.
When “Audyssey Byp. L/R” or “Audyssey Flat” is selected, or when
the auto setup measuring results have changed, “ ” lights.
• “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be
selected after the auto setup procedure has been performed.
• If the settings of the speakers for which “None” has been determined
at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R”
and “Audyssey Flat” cannot be selected and measurements have to
be taken again to include the newly-added speakers.
• When using headphones, “Room EQ” is always set to “OFF”.
Audyssey
OFF
Manual
Audyssey Byp. L/R
Audyssey Flat
[Selectable items]
ON
OFF
• “Dynamic EQ” is displayed when selecting “Audyssey”, “Audyssey
Flat” or “Audyssey Byp.L/R” in the “Room EQ” setup. When set to
“ON”, the “ ” indicator is lit.
• When the audio setup measuring results have changed, “
“
lights.
f Dynamic EQ
Make Dynamic EQ settings.
Operating from the main unit
Press the DYNAMIC EQ button.
h Night Mode
Optimized setting for late-night listening.
[Selectable items]
OFF
Low
Middle
High
Operating from the main unit or main remote
control unit
Press the NIGHT button on the main unit or the NGT button on the
main remote control unit.
The “ ” indicator lights when “Low”, “Middle” or “High” is
selected.
OFF Low Middle
High
Subwoofer
Adjust each subwoofer channel tone.
[Selectable items]
Bass
[Variable range]
–6dB ~ +6dB
• This can be set individually for the separate surround mode other
than PURE DIRECT, DIRECT and Home THX Cinema mode.
• When “Dynamic EQ” is set to “ON”, you cannot use the “Tone”
setting (vpage 94).
Setup