Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting Specifications
Auto Setup
Optimize settings for speakers in use.
Some typical examples are described below.
AUTO SETUP
1 2 3 4 5
Start
RETURN
Pre-out Assign
XLR Out Polarity
Config. 9.1
SW 1SP
STEP1 Speaker Detection
Please place the microphone at ear
height at main listening position.
Start Auto Setup
Enter Cancel
Selected item
name
List of subsequent items
Guidance text for item
at cursor position
Operation step indicators
Illustration
Operation
button guidance
Guidance text for item at cursor
position
Operation guidance text
n Icon
n List
Assign
Input Mode
Video
Rename
Switch the selected item
Selected item
Switch the selected item
Switch to the next item
Selected item
Example of the Display of the GUI
Mark at a Title
Example: Browse Menu (Top Menu)
Examples of GUI Screen Displays
Example: Menus with Illustrations
(Auto Setup)
Cursor Position Display
Operations
The same operation is possible on the main unit or remote control unit.
GUI Menu Operations
With the AVP-A1HDCI, settings and operations for most functions can
be performed by operating while looking at the GUI menus displayed
on the monitor screen.
b Switch the selected item using
ui.
1
Press the MENU button.
The GUI menu is displayed.
b To operate from the main remote control unit, be sure to set the
remote control unit to the AMP mode.
2
Press the u i p button to select the menu to be set
or operated.
b To return to the previous item, press the o or RETURN button.
3
Press the ENTER button to enter the setting.
4
Press the MENU button to nish.
Example of Display of Default
Values
[Selectable items]
9.1
7.1
5.1
In lists of selectable items or adjustable ranges, the item
surrounded by a border is the default value.
Items for which this mark is indicated at the title can be operated
from the GUI.
We recommend performing such operations from the GUI.
This is the GUI icon for this setting item or for the menu series to
which this item belongs.
Switch to the next item
The GUI cannot be superimposed when xvYCC signals and component
1080p signal, computer’s resolution (e.g.VGA) are input.
Setup