Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting Specifications
r Use the ui button to select the Security and press the i
button.
[Selectable items]
None
:
Select if not encrypted.
Can also be used even without encryption, through we
recommend encryption for improved security.
WEP
WPA-PSK(TKIP)
WPA-PSK(AES)
WPA2-PSK(TKIP)
WPA2-PSK(AES)
:
Select the encryption method according to the encryption setting
of the access point you are using.
t Use the uio p button to input the “Key” (encryption key) and
press the ENTER button.
Enter the same encryption key as used for the access point.
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
When no security settings have been used in the Internet
connection settings, this step is not necessary.
y When encryption is by “WEP”, select the “Default Key” using
the i button, and then press the o p button.
[Selectable items]
1
2
3
4
Select the same default key as used for the access point. This
should normally be set to “1”.
u Use the i button to select “Connection” and press the ENTER
button.
Network connection starts.
When connection is established with the access point,
“Connection completed.” is displayed.
AVP-A1HDCI performs automatic network setup due to the DHCP
function.
When connecting to a network that has no DHCP function,
perform the setting in step 4.
n Manual settings
q Select “Detail” and press the ENTER button.
w Use the o p button to select the Mode and press the i button.
[Selectable items]
Infrastructure
:
Select when communication is via an access
point.
Ad-hoc
:
Select during direct communication, when an
access point is not used.
e Use the uio p button to input the name of the wireless
network (SSID) and press the ENTER button.
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
q Select “Detail”.
e Input the SSID.
w Select the communication mode.
Example) Infrastructure
r Select the
encryption method.
Example) WEP
y Set only
during “WEP”
in step r.
u Select “Connection”.
t Enter encryption key.
If you are using a router with no DHCP function to automatically assign
the IP address, set the IP address manually.
4
Set the IP address.
b For details, see page 35 “Wired LAN settings” in step 3.
Setup