Denon AV SURROUND PRE-AMPLIFIER Stereo Amplifier User Manual


 

Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting Specifications
Input signal Display
Dolby
Digital
Source
DOLBY DIGITAL
(other than 2ch) /
DOLBY DIGITAL
EX
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL+PLgx CINEMA
DOLBY DIGITAL+PLgx MUSIC
DOLBY DIGITAL
Plus
DOLBY DIGITAL +
DOLBY TrueHD DOLBY TrueHD
DTS
Surround
Source
DTS (5.1ch) /
DTS-ES Discrete
6.1 /
DTS-ES Matrix
6.1 /
DTS 96/24
DTS SURROUND
DTS+PLgx CINEMA
DTS+PLgx MUSIC
DTS+NEO:6
DTS ES MTRX6.1 (z1)
DTS ES DSCRT6.1 (z2)
DTS 96/24 (z3)
DTS-HD High
Resolution Audio
DTS-HD HI RES
DTS-HD Master
Audio
DTS-HD MSTR
DVD-
Audio,
SACD
PCM (multi ch) /
DSD (multi ch)
MULTI CH IN
MULTI IN+PLgx CINEMA
MULTI IN+PLgx MUSIC
MULTI CH IN 7.1
z1: This is displayed when the input signal is “DTS-ES Matrix 6.1”
and the AVP-A1HDCI’s “AFDM” setting is set to “ON”.
z2: This is displayed when the input signal is “DTS-ES Discrete 6.1”.
z3: This is displayed when the input signal is “DTS 96/24”.
For details, see page 95, 96.
[Selectable items]
STANDARD
:
This mode is for decoding the input signals according to their format
and playing surround sound.
The display when the STANDARD mode is selected depends on the
input signal and surround back output playback mode.
Playing Multi-channel Sources
(Dolby Digital, DTS, etc.)
[Selectable items]
7CH STEREO
z1
: This mode is for enjoying stereo sound from
all speakers.
WIDE SCREEN
: This mode is for enjoying the atmosphere of
viewing a movie on a large screen.
SUPER STADIUM
: This mode is suited for viewing sports
programs.
ROCK ARENA
: This mode is for enjoying the atmosphere of a
live concert in an arena.
JAZZ CLUB
: This mode is for enjoying the atmosphere of a
live concert in a jazz club.
CLASSIC CONCERT
: This mode is for appreciating classical concert
programs.
MONO
z2
: This mode is for playing monaural movie
sources with surround sound.
VIDEO GAME
: This mode is suited for achieving surround
sound with video games.
MATRIX
: This mode lets you add a sense of expansion
to stereo music sources.
z1: Can also be set by pressing the 7CH STEREO button on the main
unit. However, the GUI menu is not displayed.
z2: When playing sources recorded in monaural in the MONO mode,
the sound will be off balance with a single channel (left or right),
so input to both channels.
DSP Simulation Playback
The desired mode according to the program source and viewing
situation can be selected from among 9 DENON original surround
modes.
The surround parameters can be adjusted (vpage 93, 94) to
achieve an even more realistic, powerful sound field.
Dolby Headphone
The Dolby Headphone mode is set when headphones are
connected to the PHONES jack while in the STANDARD (DOLBY/
DTS SURROUND) mode.
[Selectable items]
DOLBY HEADPHONE
When RECOUT mode is set to “SOURCE”, with this amplifier
signals encoded in the Dolby Headphone mode can be output from
the recording output terminals and recorded on another recorder
(vpage 73).
[Selectable items]
STEREO
:
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and subwoofer.
Stereo Playback
• Press the DSP SIMULATION button on the main unit or SIMU button
on the main remote control unit to switch the surround mode. The
mode switches each time the button is pressed.
• Depending on the program source being played, it may not be
possible to achieve a satisfactory surround effect. In this case, try
other modes to achieve a sound field suited to your tastes.
When the main unit’s DIRECT/STEREO button or the main remote
control unit’s D/ST button is pressed, DIRECT mode can be switched
to STEREO mode.
Setup