Filter
Top Products
ENGLISH
88
Example 1: Listening to preset station “3” (FM 92.5 MHz) from 12:35 to 12:56 with the everyday timer
B
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M71
TONE /SDB
FUNCTION
MENU/ SET
+
-
SURROUND /SELECT
PUSH
-
PARAM.
1,18
2,3,4,6,8,
10,12,14,16
3,5,7,9,11,
13,15,17
(2) Setting the everyday timer and once timer
2 Be sure to set the current time before setting the timer. (See page 87.)
2 Use the everyday timer to switch the power on and off (standby) once at the same time each day.
Use the once timer to switch the power on and off (standby) at the specified time once only.
2 With the ADV-M71 it is possible to play the tuner, a DVD or a CD with the timer.
2 It is possible to play a DVD, CD, tape, the tuner, MD or the device connected to the AUX terminals with the timer and to record the tuner or
the device connected to the AUX terminals onto an MD recorder or cassette deck using the timer.
Timer playback is not possible for some DVDs. (Most DVDs stop at the menu screen.)
1
Turn on the power.
2
Press the MENU/SET button to display “TIMER”.
MENU/SET
Main unit
3
Turn the SURROUND/SELECT knob to display “EVERYDAY”,
then press the MENU/SET button.
• The display switches as follows
each time the SURROUND/SELECT
knob is turned:
TIMER
EVERYDAY
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
4
Press the MENU/SET button.
E FUNC
MENU/SET
Main unit
ON / STANDBY
Main unit
The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
MENU/SET
Main unit
5
Turn the SURROUND/SELECT knob and set the function to
“TUNER”.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
E TUNER
The function switches as shown below each time the
surround button is pressed.
Functions marked “*” differ according to whether “LINE-
1” or “LINE-2” is set.
DVD TUNER (LINE1)
(LINE2)
(LINE1)
TU
AUX (LINE1 2)
TU (LINE2)
*
*
*
**
:Clockwise turn
:Counterclockwise turn
6
Press the MENU/SET button.
MENU/SET
Main unit
7
Turn the SURROUND/SELECT knob and select preset number
“P03”.
P03 FM 92.50M
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
8
Press the MENU/SET button.
• The data for the selected station is stored in the memory
and the unit is set to the timer start time setting mode.
•“E” and “on” are displayed.
Eon 0:00
MENU/SET
Main unit
9
<Setting the timer start time>
Turn the SURROUND/SELECT knob to set the hours place to
“12”.
Eon 12:00
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
ONCE EVERYDAY
or